Load data for .30 PICRA + .308 | 180gr | Sellier & Bellot SPCE

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Sellier & Bellot SPCE
Manufacturer SKU:	2935
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.208" \| 30.7mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.327" \| 8.3mm
Shank Seated Depth:	0.327" \| 8.3mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B7227_C311
Last updated:	2025-01-01

Load data for 42 loads in caliber .30 PICRA with .308 | 180gr | Sellier & Bellot SPCE bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35143	87%	**22	100%
Accurate 4100	<<locked>>	72%	35317	87%	**11	93%
[Accurate No. 11 FS]*	<<locked>>	81%	35389	87%	**24	86%
Alliant 2400	<<locked>>	69%	36187	89%	**24	96%
Alliant BLUE DOT	<<locked>>	71%	34693	85%	**71	99%
Hodgdon H110	<<locked>>	77%	36013	89%	**43	90%
Hodgdon LilGun	<<locked>>	77%	34476	85%	**57	96%
Hodgdon TrailBoss	<<locked>>	93%	24714	61%	**0	100%
Maxam CSB 1	<<locked>>	64%	36158	89%	**01	100%
Ramshot Enforcer	<<locked>>	70%	36477	90%	**34	97%
ReloadSwiss RS 14	<<locked>>	94%	24323	60%	**0	100%
ReloadSwiss RS 30	<<locked>>	93%	35085	86%	**60	93%
SNPE Vectan A0	<<locked>>	64%	36172	89%	**33	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	35911	88%	**20	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	35230	87%	**79	100%
[Somchem S265]*	<<locked>>	84%	35041	86%	**88	89%
Vihtavuori 3N38	<<locked>>	68%	36143	89%	**65	100%
Vihtavuori N105	<<locked>>	71%	35868	88%	**75	100%
Vihtavuori N110	<<locked>>	85%	34911	86%	**24	96%
Vihtavuori N32C Tin Star	<<locked>>	76%	34476	85%	**6	100%
[Winchester 296]*	<<locked>>	77%	36405	90%	**70	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	26237	65%	**04	100%
[Accurate 4100]*	<<locked>>	61%	24656	61%	**47	87%
[Accurate No. 11 FS]*	<<locked>>	72%	26353	65%	**93	81%
Alliant 2400	<<locked>>	61%	28195	69%	**06	92%
Alliant BLUE DOT	<<locked>>	61%	26905	66%	**60	97%
[Hodgdon H110]*	<<locked>>	61%	21553	53%	**10	81%
[Hodgdon LilGun]*	<<locked>>	61%	19566	48%	**04	86%
Hodgdon TrailBoss	<<locked>>	66%	15316	38%	**3	100%
Maxam CSB 1	<<locked>>	61%	33330	82%	**1	100%
Ramshot Enforcer	<<locked>>	61%	26934	66%	**89	93%
ReloadSwiss RS 14	<<locked>>	62%	13764	34%	**3	100%
[ReloadSwiss RS 30]*	<<locked>>	72%	19682	48%	**1	80%
SNPE Vectan A0	<<locked>>	61%	33460	82%	**07	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14257	35%	**7	83%
SNPE Vectan BA7 1/2	<<locked>>	61%	30632	75%	**27	100%
[Somchem S265]*	<<locked>>	68%	22365	55%	**4	80%
Vihtavuori 3N38	<<locked>>	61%	29341	72%	**79	100%
Vihtavuori N105	<<locked>>	62%	26542	65%	**56	100%
[Vihtavuori N110]*	<<locked>>	61%	17013	42%	**5	83%
Vihtavuori N32C Tin Star	<<locked>>	61%	25164	62%	**1	100%
[Winchester 296]*	<<locked>>	66%	25759	63%	**06	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.